Current Projects

Josh and I have each taken on different tasks to keep the house moving forward. Some are small and some are quite large.

My project, for the past couple of weeks, has been spackling and sanding the back bedroom to get it ready for primer. This has been my "outfit" for the project...

And I sound like Darth Vador!














Josh's project was smaller, but just as necessary. Once of the annoying things with our kitchen was the doors on the fridge opened the wrong direction. Josh tackled the task today. Here are the pics from his adventure.

Our First Homeowner (Semi) Emergency!

On Sunday, our washing machine decided it was going to quit working in the middle of a load of wash. We tried various methods of coaxing it into working, ranging from asking it nicely to slamming the lid in disgust. When the latter actually brought about some change, I guessed the problem had something to do with the lid switch. So, I pulled out my trusty voltmeter (thanks Dad for reminding me to get that) and cracked open the back panel of the washer. One problem: the washer is in a position that can't be moved very much, so I was forced to climb behind it!



Needless to say, this was not a particularly comfortable position! First, I had to drain the supply lines (hence the re-used Philadelphia Eagles popcorn tin), then crawl behind the machine to unplug it. Let me tell you, there are very few places filthier than behind the washer and dryer!

Here's a pic of the necessary tools assembled:



So I didn't electrocute myself, or wreck the machine in the process, I acquired a wiring diagram for the machine. Well, OK, we found one stuffed into the back panel. But I would have gotten one if we hadn't found this one! :) Here's what it looks like:



Thanks to www.applianceaid.com for the diagram.

First, I tested the switch for continuity (that's a fancy way of saying I wanted to see if the lid switch actually worked). Here's a great diagram of how to accomplish this:



Needless to say, the switch failed miserably. I basically ended up hot-wiring the thing so that it always behaved as if the lid was closed, by connecting the red, black, and yellow wires together. After plugging the machine back in, I crawled out and turned the washer back on. Thankfully, it worked on the first try! We're ordering the part from a local appliance shop, and it will hopefully arrive soon. Until then, at least we have a working washer!

*WARNING*: I did this because we don't have kids, and neither I nor my wife plan on sticking our hands in the machine while it's running. I don't recommend it if you have little ones running around.

Winterizing our Home:


We got our second oil bill the other day and were a little freaked out by how high it was. So we decided that we really needed towork on winterizing the parts of the house that were letting the cold air in and the hot air out. Some tasks have been easier that others.

• Adding foam outlet gaskets to the outlets/switches on the exterior walls vastly reduced the draft coming through the walls (see image to left). This is a very cheap and effective way to reduce those annoying drafts from coming through the walls. It's amazing what you can learn from a little searching around the Internet!

• We also took the time, finally, to go around and close all of the storm windows. Unfortunately that wasn't as simple as it sounds considering many of the windows in our house have been painted shut. A little elbow grease, a rubber mallet, and a utility knife did the trick on most of them.

• We had installed a programmable thermostat a while ago and it works wonderfully. The only problem was that the boiler seamed to be kicking on a lot during the day even though we had the temperature set for a constant 65 degrees. We decided to try turning it down to 63 degrees to see if that would help and it has drastically reduced the amount that the boiler kicks on. Saving money where we can is always a good thing!

Our biggest problem, however, didn't start out that way. Removing air conditioners is usually a pretty easy task. That is if the air conditioner was built in the last 20 years! We had a behemoth of an air conditioner in one of of first floor windows circa 1965. It also appears that it had never been removed since it was installed. I can only assume that the last homeowners didn't take it out of the window because it was a huge project - the bolts were all stripped and rusted solid, the windows were jammed making it difficult to unwedge.

This picture shows what can happen to even the correct metal saw blade when dealing with difficult, rusted bolts. Josh made it through all the necessary cuts before the blade finally called it quits.

Once the bolts were cut we faced the challenge on unsticking the window to loosen the decades of paint that held it in place. It took a little coaxing from our trusty rubber mallet and a little wiggling of the air conditioner to finally break it free.

I got to stand in the warmth of the house to "catch" the air conditioner as Josh shoved it through the window. This took a little elbow grease and teamwork because the air conditioner came out in two parts. I've never seen an air conditioner like this before!


Here is Josh giving the air conditioner the heave-ho from the outside. After we removed the brackets that bolted it to the wall.


And here I am once the beast was removed! I definitely can say that this monstrosity will be making its way elsewhere - maybe a landfill or the home renovation sculpture I am planning in all of my spare time...


And here she is. The beast that Josh and I defeated!

This was my project this weekend.

Our kitchen has a great amount of space. However, the stove is off in the corner by itself with NO counter top nearby. The kitchen cart has helped out a lot. It's been up for only two days and has already gotten a lot of use.

I highly recommend this idea for anyone who needs a little added counter space in their kitchen. It was really easy to assemble.

http://www.kitchensource.com/kitchen-islands/hs-5216-95.htm

There are many different kinds out there but this one is very affordable